Nail Plier Adapter for Battery Drill – SpeedRivet | Bowlift

Painful riveting with a hand tool is a thing of the past.

Anyone who regularly works with blind rivets knows the problem: After just a few minutes, the wrist and forearm start to hurt, and the results are often uneven. The SpeedRivet adapter transforms any standard cordless screwdriver into an electric rivet machine - simply place it on the 6.35mm hex shank, insert the rivet, and turn to drill it cleanly through. DIY projects, bodywork, or the installation of air conditioning units become significantly faster and easier.

Advantages

• No more physical effort necessary: The hardened 3-jaw clamping system automatically grips the rivet, turns it cleanly, and releases it – no more tired hands, no more slipping.
• Faster completion: One hand movement to insert, a pull on the drill to secure – what previously required several movements now happens in one go, meaning that working on large areas takes significantly less time.
• Fits any drill: The standard 1/4" hex shank is compatible with almost all cordless and battery-operated drills and screwdrivers, so no additional device needs to be purchased.

Specifications

• Material: Carbide steel alloy and impact-resistant ABS plastic
• Drive shaft: Standard 1/4" Hex (6.35 mm)
• Nozzle sizes: 3/32" (2.4 mm), 1/8" (3.2 mm), 5/32" (4.0 mm), 3/16" (4.8 mm)
• Max RPM: 1000 RPM (low speed, high torque recommended)
• Minimum torque: 15 N·m
• Overall length: approx. 143 mm (5.62 inches)

Application

1. Clamping: Securely insert the hex shank of the adapter into the drill chuck and screw on the appropriate nozzle for the desired rivet size.
2. Inserting the rivet: Insert the blind rivet into the nozzle, set the drill to low speed, and cleanly insert the rivet into the pre-drilled hole.
3. Assembly: Drill until the mandrel breaks, pull back the adapter - the rivet sits cleanly and flush without burrs.

Pro tip: Set the drill to the lowest torque and lightly hold it just before the mandrel breaks against the breaking point - this prevents the adapter from snapping back abruptly after insertion.